Bike has a little over 50 000 kms on the odo and have replaced the water pump once before.
But ended up having a flickering oil light, so suspected the water pump, but I did not have really good slurry in the CJ clear clutch cover:
But turned back home, tipped it over and pulled the filter:
Some waves:
Put it back together without the filter and drove it to my dad where I luckily had parts enough to sort it out, had added water pump seal and shaft last time ordering from CJ
Since it wasn’t really planed to change the water pump I didn’t take the time to take a lot of detailed pictures.
But you can see there is some contamination in the oil:
And there seems to be quite a build up of casting sand, even if I did try to flush everything first time so think I´m just going to add changing the seal and shaft every other oil change from now on:
Shaft quite badly worn:
Did a time lapse video of the wrenching:
Leave a Reply